český Deutsch English Español Francais Italiano Português slovenský
Drilling lubricant, tapping lubricant, threading lubricant, automatic tapping tool lubricant, drill cutting lubricant, tape head lubricant, cutting fluid, cutting oil, cutting lubricant manufacturer, industrial cutting lubricant, cutting lubricant ibiotec, tapping stainless steel, additive for lubricant
Last update: 2024/02/13 16:39

MACHINING FLUID FOR DRILLING, BORING, TAPPING

SUITABLE VISCOSITY FOR OPERATIONS ON AUTOMATIC MACHINES

COMPOUND MIXTURE OF 100% EXTREME PRESSURE ANTI-WEAR ADDITIVES

TOOL WORKING LIFE MULTIPLIED BY 3

SPECIAL FOR EXTRA-HARD, STAINLESS OR HEAT-RESISTANT STEELS

ADDITIVE FOR FORMULATORS AND USERS OF WHOLE CUTTING OILS

CUTTING, STAMPING OILS, INCLUDING EVANESCENT LUBRICANTS

 

 

 

 

DESCRIPTION

Complex mixture of additives with very high oil film resistance and an especially high weld-proof power.

PLASTIKOL T2 is recommended:
For the cutting and stamping of strongly alloyed thick steel sheets.

For high-yield machining of extra-hard steels, including refractory steels.
As an additive to classic cutting oils.
As a drilling fluid for blind holes or through-holes of any diameter.

Non-adhesive product allowing excellent evacuation of chips, non-siccative product, does not adhere.
Suitable for drilling in all sizes, including very small diameters. Allows deep boring operations and boring in hard metals. Manual, semi-automatic, or automatic threading operations.
Tapping. Slotting.
This product highlights the extended life of tools.

 


PLASTIKOL T2 guaranteed free of chlorinated solvents
and especially free of 1,1,1-trichloroethane

 

                             Download the data sheet

 

PHYSICO-CHEMICAL PROPERTIES TYPICALS

PHYSICAL PROPERTIES OF THE LUBRICATING OIL

PROPERTIES

STANDARD or METHOD

VALUE

UNITS

Appearance

visual

Fluid 

nm

Colour

Visual

Yellow 

nm

Scent

Olfactory

Without 

nm

Density at 20°C

NF EN ISO 12.185

1085 

g/l

Nature of solid lubricants

-

Without 

-

Nature of base oil

-

Mineral 

-

Kinematic Viscosity

Base oil at 40°C

Base oil at 100°C

NF EN ISO 3,104

 

30

 25 

 

mm2/s-1

mm2/s-1

Sulphated ash

NF T 60.144

 1.8

%

Acid index (ai)

EN 14,104

< 1 

mg(KOH)/g

Closed-cup flash point

NF EN 22.719

> 100 

°C

Self-combustion point

ASTM E 659

> 250 

°C

Freezing point

ISO 3016

-25 

°C

Impurities

> 25 µ

> 75 µ

> 125 µ

FTMS 791 3005

 

0

0

 0 

 

number/ml

number/ml

number/ml

PERFORMANCE PROPERTIES

PROPERTIES

STANDARD or METHOD

VALUE

UNITS

Utilisation temperature range

-

-20 +200 

°C

Copper blade corrosion 24h 100°C

ISO 2160

1b 

value

Loss by evaporation 22h at 121°C

ASTM D 972

10 

% mass

SHELL 4-ball test

Impression diameter

Weld load index

 

 ISO 20.623 – ASTM D 2266

 

0.42

5,500 

 

mm

daN

SRV test 

ASTM D 5707

0.10 

coefficient

Elastomer swelling test   

(dimensional change)

FTM 791

1.5 

%

Suppression of operating noise

FAG MMG 11

nm 

category

Maximum permitted speed 

-

nm 

m/s-1

Water wash-off resistance at 80°C   

ASTM 1264

< 5 

%

Cold starting torque at -20°C

ASTM D 1478-63

8 

N.cm

nm: not measured or cannot be measured

 

PRESENTATIONS

Burette 250 ml

           Extreme pressure fluid for drilling boring tapping special for extra-hard stainless and refractory steels on automatic and semi-automatic machines. Ibiotec cutting oils, whole cutting fluid, cutting oil, machining fluid, drilling oil, drilling fluid, tapping oil, tapping fluid, threading oil, threading fluid, cutting lubricant. Supplier of machining oils. Suppliers of machining fluids. Suppliers of machining fluids. Manufacturers of machining fluid. Stainless machining lubricant.

    Can 20 kg

 

 

 

 Extreme pressure fluid for drilling boring tapping special for extra-hard stainless and refractory steels on automatic and semi-automatic machines. Ibiotec cutting oils, whole cutting fluid, cutting oil, machining fluid, drilling oil, drilling fluid, tapping oil, tapping fluid, threading oil, threading fluid, cutting lubricant. Supplier of machining oils. Suppliers of machining fluids. Suppliers of machining fluids. Manufacturers of machining fluid. Stainless machining lubricant.

 

 

        Drum 220 kg

 

 

 

Fluide extreme pression pour percage forage taraudage special aciers extra durs inoxydables et refractaires sur machines automatiques et semi automatiques. huiles de coupe ibiotec, fluide de coupe entier, huile de coupe, fluide d’usinage, huile de percage, fluide de percage, huile de taraudage, fluide de taraudage, huile de filetage, fluide de filetage, lubrifiant de coupe. Fournisseur huiles usinage. Fabricant huiles usinage. Fournisseurs fluides usinage. Fabricants fluide usinage. Lubrifiant usinage inoxydables

                                                                              

 

Looking for another product?

Discover our entire range by clicking on the photo

Drilling lubricant, tapping lubricant, threading lubricant, automatic tapping tool lubricant, drill cutting lubricant, tape head lubricant, cutting fluid, cutting oil, cutting lubricant manufacturer, industrial cutting lubricant, cutting lubricant ibiotec, tapping stainless steel, additive for lubricant

 

Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area

 

 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 

IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.


IBiotec® Tec Industries®Service is on : YOUTUBE